Återställa serviceindikator på en Mini -04?

[Mäts]

Googlade mig fram till detta eminenta forum... Har använt sökfunktionen för att föröka hitta info om nedanstående fråga men tyvärr lyckades jag inget vidare...
Har precis gjort oljeservice på min systers Mini Cooper 1,6 -04. Detta skedde på en icke auktoriserad verkstad. Eftersom de inte hade rätt instrument/kunskap för att nolla serviceindikatorn så indikerar denna att bilen ska servas.
Min fråga till er experter är alltså; hur gör jag nu? Kan jag på något sätt lösa detta på egen hand eller måste jag åka upp och fjäska för den auktoriserade verkstaden?

Stort tack på förhand!

[ola]

gör så här;

Resetting the Service Interval Display (distance-based inspection)

1. Turn ignition lock to position 0

2. Press the reset button for the trip distance recorder, keep it pressed and turn the ignition lock into position 1 (terminal R) The input mask for the test functions appears

3. Press and hold the button; after 5 seconds, the service status is displayed
SIA OIL SERVICE or INSPECTION and the remaining distance are shown
The remaining distance is displayed with ”rSt” (reset) if the coded minimum consumption limit has been reached and can be reset.
If the remaining distance is displayed without ”rSt” (reset), the coded minimum consumption limit has not been reached and no reset is possible.

4. To reset

Press and hold down the button to enter the reset mode after another 5 seconds if the coded minimum limit has been reached.
If the minimum limit has been reached, ”rSt” (reset) flashes in the display for 5 seconds.
The distance-based inspection can now be reset by releasing, pressing again and releasing the button while the display is flashing.
After the reset, the new remaining distance is displayed for 5 seconds.
If resetting is not required, the old remaining distance can be retained by releasing the button and waiting for the flashing sequence to elapse.
The old remaining distance is displayed for 5 seconds.

Resetting the Service Interval Display (time-based inspection)

The time-based inspection can be reset after the distance-based inspection.

If the time-based inspection is not coded, End SIA is displayed with the old remaining distance (if this has not been reset) or with the new remaining distance for the distance-based inspection (if this has been reset).

The time-based inspection status is shown if time-based inspection is encoded.

The due time-based inspection is shown with or without ”rSt” (reset).

The due time-based inspection is shown with ”rSt” (reset) if the coded minimum limit has been reached.

The due time-based inspection is shown without ”rSt” (reset) if the coded minimum limit has not been reached.

To reset

If the due time-based inspection is displayed with ”rSt” (reset), press and hold down the button for longer than 5 seconds.

After 5 seconds, the display ”rSt” (reset) flashes for 5 seconds.

The time-based inspection can now be reset by releasing, pressing again and releasing the button while ”rSt” (reset) is flashing.

The new time-based inspection status is shown for 5 seconds followed by End SIA together with the new time-based inspection status.

If resetting is not required, the old time-based service can be retained by releasing the button and waiting for the flashing sequence to elapse.

The old time-based inspection status is shown for 5 seconds followed by End SIA together with the old time-based inspection status.

[Mäts]

Supertack för snabbt svar!!!