handdator

Visa fullständig version : Orginal avgassystem



Calle08
2007-12-27, 18:44
Hur stort är ett orginal avgassystem? Skulle vilja byta ut mitt kromade slutrör till orginal då jag anser att det jag har är för stort, men jag misstänker att inte mitt avgassystem är orginal. Jag har försökt mäta omkretsen på avgassystemet och kommit fram till att det är ca 1,9 tum och slutrören är nästan 3 tum. Är avgassystemen så stora orginal?

Bifogar en bild på slutröret jag har idag

/Calle

Marcus
2007-12-27, 18:55
Eh, byt inte till orginalärtrören. Dina pipor ser lite skumma ut, ersätt dem med riktiga Worksslutrör istället så får du precis lagom stora.

Ace
2007-12-27, 18:56
Vad har du för system idag? Ta en närbild på slutrören så kanske någon kan identifiera dem. Finns ju några att välja på.

JockeO
2007-12-27, 19:56
En lite kuriosastory om original slutrör på MCS:en (kanske även MC?)...

Då designteamet hade slitit dygnet runt med lermodellen i fullskala, inför premiärvisningen för beslutsfattarna, kom de i sista stund på att de totalt glömt bort en detalj.

De hade kämpat så mycket med karossformerna och lermodellen, att de totalt glömt bort avgaspipor!

Och snart var det gryning och dags för visning!

Designchefen tittade sig omkring i lokalen och fann ett par urdruckna Budweisser ölburkar... Kvickt skar de ut och formade uttag i karossen och tryckte dit två kromsprayade ölburkar som avgaspipor.


Som vi alla ju redan vet och instämmer i, så blev det klart godkänt för Nya MINI. Beslutsfattarna beordrade "Ändra ingenting!"

Och naturligtvis visste de ingenting om den stulna ölburksdesignen till piporna.
Så det blev till att mörka hela vägen...

Och visst, de är både snygga och ölburkslika i sin utformning!

/M v h, Jocke O

Calle08
2007-12-27, 20:32
Eh, byt inte till orginalärtrören. Dina pipor ser lite skumma ut, ersätt dem med riktiga Worksslutrör istället så får du precis lagom stora.

Vet du vad det är för omkrets på Worksslutrören? Tror du de skulle passa på mitt avgassystem som är nästan 2 tum? Var inne på BMW och fråga men de kunde inte svara på det.

Calle08
2007-12-27, 20:34
Vad har du för system idag? Ta en närbild på slutrören så kanske någon kan identifiera dem. Finns ju några att välja på.

Jag ska försöka ta några bilder på det men det blir nog tidigast nästa år ;)

Ace
2007-12-27, 20:44
Läste också den lilla anekdoten. Han som satt dit ölburkarna hade väl inte trott att killen som fick till uppgift att designa avgassystemet skulle ta han så på orden. Att han lät dom se likadana ut som ölburkar i produktion.
Tänk om han tagit konservburkar? hihi hi

Christian
2007-12-27, 22:07
Vet du vad det är för omkrets på Worksslutrören? Tror du de skulle passa på mitt avgassystem som är nästan 2 tum? Var inne på BMW och fråga men de kunde inte svara på det.

Jag har Works avgassystem.

Så det är bara att hojta till om jag ska mäta något.

Calle08
2007-12-28, 09:48
Jag har Works avgassystem.

Så det är bara att hojta till om jag ska mäta något.

Du får gärna mäta omkretsen på ditt avgassystem. Som sagt, jag mätte mitt till drygt 2 tum och är nyfiken på om Workspiporna skulle passa på det.

/Calle

GT
2007-12-28, 10:02
If your car is TMA 207 "DONT" change the exaust........ its my old car!!!!

Calle08
2007-12-28, 13:22
If your car is TMA 207 "DONT" change the exaust........ its my old car!!!!

Yes, that´s the one. When did you own it? It sounds good but i don´t like the exhaustpipes. What´s the name of the exhaust system?

Christian
2007-12-30, 01:08
If your car is TMA 207 "DONT" change the exaust........ its my old car!!!!

aha.....!! Ett ihopplock från skrotniklas rörlåda.... hmm..0,7mm rör.

:uglyhammer: :uglyhammer: :uglyhammer:

GT
2007-12-30, 10:34
Raka rör in GBG built the system ........ you will not find a better exaust anywhere!!!!!

Please send in more pics of my old car!!!!!!!

GT
2007-12-30, 17:02
Please please send in more pics......


My wife was the owner (on paper)Madelen Strand

We was the first owner!!!

And i dont know if you know this but you have 197 bhp

And your car should do 118km in second gear

Mr_Varre
2007-12-30, 17:06
nice i second gear i want it too on my car :) and more power toooooooo :(

GT
2008-01-01, 18:40
Where are the pics?????

Calle08
2008-01-01, 20:44
Where are the pics?????

I have not been home until know, therefore no pictures, but here you go. It´s not the best pictures but it´s a start.

I didn´t know that it was 197 hp in my car. I like it a lot :p But i would like to change the exhaustpipes to something else, do you think workspipes would fit?

Have you done anyting more than the exhaust with the car? Do you remember hove many miles you hade it for?

GT
2008-01-01, 20:57
I have not been home until know, therefore no pictures, but here you go. It´s not the best pictures but it´s a start.

I didn´t know that it was 197 hp in my car. I like it a lot :p But i would like to change the exhaustpipes to something else, do you think workspipes would fit?

Have you done anyting more than the exhaust with the car? Do you remember hove many miles you hade it for?


5,400mil

look inside your car ...... you have 12 airbags
it was a very special cooper s to begin with.

This is the only electronicaly tuned mini that i have done.

The ECU is upgraded by BSR
Green line air filter
S.C.R.A.M mapping
Bosten injection system by summet racing
H&R springs
One off exaust by Raka rör + cat

But when i sold it i changed the car for a JCW cooper s
and they told me at BMW that they wanted it back to original.
so i took away the H&R kit and the painted wheel arches, but i left the tunning kit and the exaust on the car.

If you look at the spec sheet on your car you will find that you dont have CURRY or CHILLI packet on your car , But you have many expensive extras instead.
eg:
exra lights
multi rat
both seats ajustment
12 airbags
diff

Calle08
2008-01-01, 21:10
5,400mil

look inside your car ...... you have 12 airbags
it was a very special cooper s to begin with.

This is the only electronicaly tuned mini that i have done.

The ECU is upgraded by BSR
Green line air filter
S.C.R.A.M mapping
Bosten injection system by summet racing
H&R springs
One off exaust by Raka rör + cat

But when i sold it i changed the car for a JCW cooper s
and they told me at BMW that they wanted it back to original.
so i took away the H&R kit and the painted wheel arches, but i left the tunning kit and the exaust on the car.

If you look at the spec sheet on your car you will find that you dont have CURRY or CHILLI packet on your car , But you have many expensive extras instead.
eg:
exra lights
multi rat
both seats ajustment
12 airbags
diff

I´m no expert in tuning so i don´t understand everything you done. But i don´t have any extra lights and i didn´t think i had a diff.

I found this test in Automotorsport, have you seen it before? http://www.automotorsport.se/biltester/biltest.asp?url=2002/0218/021805.html&rubrik=DUELLTEST+Cooper+S+mot+Clio+Sport%3A+Socker bitar

GT
2008-01-01, 21:15
I know and that is why i sold the car back to bmw........


Think of my supprise when i saw my car on a rally track!!!!

Calle08
2008-01-01, 21:16
5,400mil

look inside your car ...... you have 12 airbags
it was a very special cooper s to begin with.

This is the only electronicaly tuned mini that i have done.

The ECU is upgraded by BSR
Green line air filter
S.C.R.A.M mapping
Bosten injection system by summet racing
H&R springs
One off exaust by Raka rör + cat

But when i sold it i changed the car for a JCW cooper s
and they told me at BMW that they wanted it back to original.
so i took away the H&R kit and the painted wheel arches, but i left the tunning kit and the exaust on the car.

If you look at the spec sheet on your car you will find that you dont have CURRY or CHILLI packet on your car , But you have many expensive extras instead.
eg:
exra lights
multi rat
both seats ajustment
12 airbags
diff

You don´t have any old pictures of the car?

GT
2008-01-01, 21:17
only on real film

Calle08
2008-01-01, 21:22
To bad, would be fun to se how it looked.
But do you think worksexhaustpipes will fit the exhaust?

GT
2008-01-01, 21:24
To bad, would be fun to se how it looked.
But do you think worksexhaustpipes will fit the exhaust?

No! they will not!!!!!

The exuast you have is welded at the end pipes.

Calle08
2008-01-01, 21:40
Ok.

Are there any easy way to find out if a have a diff? It dosen´t feel like it´s a diff when i drive.

GT
2008-01-01, 22:35
Ok.

Are there any easy way to find out if a have a diff? It dosen´t feel like it´s a diff when i drive.

turn off the anti spin and do a wheelspin , you will leave 2 stripes

Christian
2008-01-01, 23:02
turn off the anti spin and do a wheelspin , you will leave 2 stripes
=Is that equal with no diff ???

=Är det samma som om man inte har diff?

Calle08
2008-01-02, 10:18
Jag trodde inte diff fanns som tillval på de första bilarna utan det kom som tillval efter faceliften som kom 2004-2005? Stämmer det?

http://www.coopersweden.se/showthread.php?t=4440&highlight=diff

GT
2008-01-02, 10:20
Jag trodde inte diff fanns som tillval på de första bilarna utan det kom som tillval efter faceliften som kom 2004-2005? Stämmer det?

http://www.coopersweden.se/showthread.php?t=4440&highlight=diff

like i said "Your car is special""

Rausner
2008-01-02, 17:58
=Is that equal with no diff ???

=Är det samma som om man inte har diff?Nee om det spinner på bägge (alltid även odiffade kan ha tur å dra loss på bägge) så är bilen diffad vilket Calle's säkert är utifrån vad Paul skrev!

Johan W
2008-01-02, 20:53
Minin brukar dra loss på bägge även utan diff, vet att Daniel ritade två svarta streck på åtminstonde 20-30meter :).

Christian
2008-01-02, 22:22
Minin brukar dra loss på bägge även utan diff, vet att Daniel ritade två svarta streck på åtminstonde 20-30meter :).

Vardagsmat......:cool: